Sargent 351 Series Aluminum Closer User Manual download pdf (Page 1)

SARGENT 351 DOOR CLOSERS

WITH CPS/CPSH ARMS

INSTALLATION INSTRUCTIONS

351 ADJUSTABLE FROM SIZE 1 THRU 6

CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE.

FOR ASSISTANCE CALL SARGENT AT 1-800-727-5477.

DETERMINE MAXIMUM DEGREE OF OPENING OR HOLD OPEN (CPSH) REQUIRED. DRILL AND TAP DOOR AND FRAME FOR

#12-24 MACHINE SCREWS. WHEN USING SELF TAPPING SCREWS PROVIDED, PREDRILL WITH A 3/32" DRILL.

PULL SIDE PULL SIDE

PUSH SIDE PUSH SIDE

LEFT HAND DOOR RIGHT HAND DOOR

CLOSERS ARE NON-HANDED

A7345B

13/16"

CENTERLINE

HINGE

“A”

1-15/16"

2-11/16"

13/16"

5/16"

3-1/16"

3-7/8"

1-7/8"

9/16"

5/8"

2-5/8"

2-1/2"

CENTERLINE

HINGE

“B”

(FROM STOP)

DEGREE OF DOOR OPENING AT “HOLD OPEN” ■

85° 90° 95° 100° 105°

110°

DIM. “A”

9-1/2" 8-3/4" 8-1/8" 7-9/16" 7-1/16" 6-5/8"

DIM. “B” 10-3/16" 9-7/16" 8-13/16" 8-1/4" 7-3/4" 7-5/16"

■ DIMENSIONS FOR GIVEN DEGREE BASED ON 4-1/2" HINGE. WHEN 3-1/2"

TO 6" HINGES ARE USED, HOLD OPEN ANGLE WILL CHANGE BY LESS

THAN 1/2°. DEAD STOP OCCURS 3° BEYOND HOLD OPEN.

IMPORTANT NOTICE

PRE-DRILL 3/32"

HOLES FOR SELF-

TAPPING SCREWS

OR TAP #12-24 FOR

MACHINE SCREWS

A7345B

SPRING

ADJUSTMENT

NUT

INSTALL DOOR CLOSER TO DOOR WITH SPRING

ADJUSTMENT NUT AWAY FROM HINGE.

NOTE:

351 CLOSER BODIES ARE NON HANDED. IT

IS IMPORTANT THAT THE CLOSER BODY IS

INSTALLED WITH “RH” SYMBOL AT TOP FOR

RIGHT HAND DOORS, “LH” SYMBOL AT TOP

FOR LEFT HAND DOORS.

MOUNT FOOT BRACKET TO DOOR STOP.

BUMPER & HOLDER

12-24 x 1" MS or

#12 x 1-3/4"

12-24 x 1-3/4" MS

or #12 x 2-1/2"

4 #12-24 x 5/8" MS

or #12 x 1-3/4"

INSERT

“CPSH” ONLY

RH CPSH

SHOWN

1/2"

7/8"

5/8"

CPSH SHOWN

CPS SIMILAR

IMPORTANT: USE A MINIMUM

OF 7 SCREWS.

USE SPACER

WHEN REQUIRED

ALTERNATE:

PREASSEMBLE ARMS

PRIOR TO ATTACHING

TO STOP.

ARM MUST BE THE SAME HAND AS THE DOOR. ASSEMBLE THE

HOLDER WITH BUMPER & INSERT (CPSH ONLY) TO FOOT

BRACKET AS LOCATION OF THESE PARTS DETERMINES THE

“HAND”.

2005, 2008, Sargent Manufacturing Company, an ASSA ABLOY

express written permission of Sargent Manufacturing Company is prohibited.

2005, 2008, Sargent Manufacturing Company, an ASSA ABLOY

express written permission of Sargent Manufacturing Company is prohibited.

1 2 3 4

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

SARGENT 351 DOOR CLOSERS WITH CPS/CPSH ARMSINSTALLATION INSTRUCTIONS351 ADJUSTABLE FROM SIZE 1 THRU 6CAUTION: FAILURE TO INSTALL OR ADJUST PROPER

Page 2 - INCREASE

4A5ABCA. OPEN DOOR AND INSTALL PIVOT AS SHOWN.B. USE SCREW TO SECURE PIVOT AND ARMS AS SHOWN.ABTO ADJUST HOLDER ARM (CPSH ONLY)ALL CPSH ARMS ARE SHIPP

Page 3

4A5ABCA. OPEN DOOR AND INSTALL PIVOT AS SHOWN.B. USE SCREW TO SECURE PIVOT AND ARMS AS SHOWN.ABTO ADJUST HOLDER ARM (CPSH ONLY)ALL CPSH ARMS ARE SHIPP

Page 4

SARGENT 351 DOOR CLOSERS WITH CPS/CPSH ARMSINSTALLATION INSTRUCTIONS351 ADJUSTABLE FROM SIZE 1 THRU 6CAUTION: FAILURE TO INSTALL OR ADJUST PROPER

Sargent 351 Series Aluminum Closer User Manual Page 1

Browse online or download User Manual for Safety Sargent 351 Series Aluminum Closer. SARGENT 351 Series Aluminum Closer User Manual

Summary of Contents

More documents for Safety Sargent 351 Series Aluminum Closer

Comments to this Manuals

Sargent 351 Series Aluminum Closer User Manual Page 1

Browse online or download User Manual for Safety Sargent 351 Series Aluminum Closer. SARGENT 351 Series Aluminum Closer User Manual

Summary of Contents

More documents for Safety Sargent 351 Series Aluminum Closer

Comments to this Manuals

Related products and manuals for Safety Sargent 351 Series Aluminum Closer