Sargent 7000 Series Vertical Rod Lock User Manual download pdf (Page 5)

PAGE 5

7860D

4/13

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Chassis mounting screw

metal door application

(#10-24 x 3/4" Phillips flat

head mach. screws, 4 pcs)

ET Mounting Screw (1/4"-20 x 3"

Phillips oval head mach. screws 2 pcs)

Top case mounting screw

(#10-24 x 3/8" Phillips oval

head machine screw 2 pcs)

GG HH

2) Screw top bolt & rod assembly (A) into inner chassis (B).

3) Slide complete assembly into top of door.

4) Attach inner chassis (B) to door with (2) screws (GG).

5) Through bolt inside and outside ET Lever trims using ET mounting screws.

Spindle cams must be UNDER inner chassis platform (C).

6) USE INSIDE TRIM to adjust TOP BOLT AND ROD assembly (A).

For 1/8" GAP OR LESS between top

of door and door frame, rotate bolt even

with top of door.

For 1/8" GAP OR GREATER between

top of door and door frame, rotate bolt

to gap minus 1/8" above door.

Top bolt & rod assembly

Outside ET Lever Trim

Inner Chassis

GG Screws (2)

ET Mounting Screws (2)

Inside ET Lever Trim

Platform

1 2 3 4 5 6 7 8

No comments

Sargent 7000 Series Vertical Rod Lock User Manual Page 5