Sargent P2 PASSPORT 1000 Specifications download pdf (Page 11)

Passport 1000 P2 WiFi Exit Device

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

03/31/14

11 1-800-810-WIRE • www.sargentlock.com • A8012F

Secure chassis cover to chassis using

(4) #8-32 x 5/16” oval head machine

screws (Fig. 8).

1. Position the wire cover plate above the

chassis cover and covering the wire channel.

Mark hole positions.

Note: Make sure stamped side of plate is against door.

2. Drill (2) 3/32” diameter by 1/2” deep holes (Fig. 9A).

3. Cover wires with cover plate by securing plate to

door directly above chassis (note orientation) using

two (2) #6 x 1/2” ﬂat head security torx wood screws

(Fig. 9B).

Note: Position lower edge of cover plate against the

cover to ensure that no wires are visible.

This Side Down

Fig. 9B Detail

Back Side of

Wire Cover Plate

8 Install Chassis Cover

9 Install Wire Cover (Wood Doors Only)

(2) #6 x 1/2” Flat

Head Security

Torx Wood Screws

Inside of door

Fig. 9A

Wire Cover

(2) 3/32” Diameter by

1/2” Deep Holes

Fig. 8

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

No comments

Sargent P2 PASSPORT 1000 Specifications Page 11