Sargent P2 PASSPORT 1000 Specifications download pdf (Page 12)

Passport 1000 P2 WiFi Exit Device

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

03/31/14

12 1-800-810-WIRE • www.sargentlock.com • A8012F

10 Install Outside Escutcheon (with Optional Gasket)

Peel off adhesive backing and attach to (outside) escutcheon.

1. Position the outside escutcheon, aligning the posts

with the door prep (Fig. 10).

2. On the inside of the door, position the mounting plate

over the indicated holes.

3. Feed reader cable through opening.

4. The cable from the lockbody feeds from the bottom.

Note: Gasket optional, for non-ﬁre rated doors only.

For non-ﬁre rated door applications, an optional gasket

(Part number 52-0782) may be used as a weather seal

between the escutcheon and the outside door surface.

Note: Cable lengths exaggerated for illustrative purposes.

Fig. 10A

Fig. 10B

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

No comments

Sargent P2 PASSPORT 1000 Specifications Page 12