Sargent P2 PASSPORT 1000 Specifications download pdf (Page 9)

Passport 1000 P2 WiFi Exit Device

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

03/31/14

9 1-800-810-WIRE • www.sargentlock.com • A8012F

1. Position exit chassis carefully, verifying that the ET

spindle engages the lower hub of the exit chassis.

DO NOT PINCH THE WIRE HARNESS.

2. Secure the exit chassis with through bolts

to the ET trim using (2) 1/4 -20 x 2-3/8”

ﬂat head machine screws.

3. For wood door applications, attach

ground harness (Fig. 4C) using the

top through-bolt screw.

Fig. 4A

Inside of Door (Metal)

ET Wire Harness

(2) 1/4 x 2-3/8”

Flathead Machine

Screws (secures ET)

Exit Chassis

Fig. 4B

Inside of Door (Wood)

ET Wire Harness

Exit Chassis

(2) 1/4 x 2-3/8”

Flathead Machine

Screws (secures ET)

Put ground lug through

top ﬂat head screw and

tighten down.

Ground Harness (from

motor, wood doors only)

For devices without cylinder, go to Step 6.

1. While installing the rim cylinder, support the tail piece of the cylinder,

verifying its engagement with the top hub of the exit chassis

Note: Be sure ET harness is clear of cylinder and tailpiece.

2. Secure the cylinder by through-bolting the cylinder

through the exit chassis using (2) #12-24 x 1-7/8”

connecting screws (see Fig. 5A).

3. Verify that the key retracts latchbolt.

Position cylinder so that the

SARGENT logo is right-side up.

Correct Incorrect

Fig. 5B

4 Mount Exit Device Chassis

5 Install Cylinder

Fig. 5A

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Comments to this Manuals

No comments

Sargent P2 PASSPORT 1000 Specifications Page 9

Comments to this Manuals